Stok Durumu
Stokta Yok
10.169,50 TL
(%2,00 havale indirimi)
9.966,11 TL
br style="color: rgb(67, 67, 67); font-family: Arial, sans-serif; line-height: 20px; background-color: rgb(238, 238, 238);" />
 | Fits the |
Fits the |  |
Birdycam2 Body |
Main Features of the Birdycam2 Body | |||
 | Motors The I FLIGHT gimbal motors (PITCH,5208 ROLL & YAW 6208) makes it possible for a smooth stabilization | ||
 | PCB Board We use BaseCame Simple BGC (AlexMos) 32 bit controller and matching MOU. Check out our updates page for software and firmware updates. | ||
 | Bluetooth Connection Using an Android smartphone, the Bluetooth module provides an easy connection to the gimbals PID values. | ||
 | One Touch Plate With the 'one touch' camera plate, we created an easier way for the camera's directional movement and to be easily attached and detached. | ||
 | Standard Dovetail We use a standard dovetail on the handle bar and the main body for easy installation. This provides compatibility with the Wirecam and other optional products. | ||
 | Calibration For easy and precise balancing of the gimbal, we have provided a calibration scale along with a baseline. | ||
 | Locking Knob Once locking knob has be engaged, it prevents the gimbal from any movement on that axis. |
Handle and Handle Bar |
Main Features of the Handle and Handle Bar | |||
 | Upper Handle Bar With the "flolding handle" method, it is possible to apply the 1/4" screw whole and attach optional accessories. | ||
 | Upper Handle We used a 1/4" locking knob on the handle for easy attathment and detachment from the handle bar. Installation of accessodes, such as the monitor and the joystick is possible. | ||
 | Left and Right Handle Part Using a 14mm bolt at the top of the handle bar, the handle can be mounted both at the top and bottom of the bar. Using a 16mm mounting hole at the bottom of the handle, the whole body can be mounted one stand or a Steadycam Arm. | ||
 | Joystick By applying the LED, you are able to check the mode's movement status. The joystick is capable in being placed on either the left or right handle of the body. It also has five different functioning modes. |
Stand |
Main Features of the Stand | |||
 | Main Bar With the 1 /4", 3/8. screw hole and the water level, the stand can be applied on the tripod and could be checked for its' level of horizontality. | ||
 | Stand Handle The handle could easily be attached to the stand and the upper handle. It can also be used as a handle for the gimbal. | ||
 | Leg The knob enables height adjustment and the rubber part of the knob prevents it from slipping. |
Battery |
Suitable for 12V or 16V battery
Select the voltage then press the Check Button for four seconds until the light on.
Main Features of the Battery | |||
 | Battery With the VARAVON T7412 battery, 7.4V/8.4V/12V(10,400mAH) voltage is available for selection. In addition to the gimbal, the battery is compatible with the Motor-Roid and Time-Roid. |
 | Check Select the voltage then press the Check Button for four seconds until the light on. |
Birdycam2 Bag |
The Birdycam2 Bag was designed as a soft-hard case type in order
to protect the product from major/minor extremal shocks.
It may also be used for storage purposes and transferring products.
to protect the product from major/minor extremal shocks.
It may also be used for storage purposes and transferring products.
Main Features of the Birdycam2 Bag | |||
 | Lock Buckle We applied 4 lock buckles to protect the Birdycam. | ||
 | Storage The soft foam was designed to protect each part of the Birdycam from external shocks. |
|
Bu ürüne ilk yorumu siz yapın!
|